Metso Outotec's effective and efficient belt cleaning systemsSponsored
Belt cleaning isn’t just a question of aesthetics, but rather an important determining factor if efficient, safe and profitable conveying is to be achieved. Metso Outotec has developed a belt cleaning product range called ABC – Absolute Belt Cleaning. The goal was to provide technical solutions that gave the products high efficiency, long wear life and a minimal need for maintenance. The products have been tested for a long time – under tough conditions – and have proved to meet the very high goals that were set at the start of the development process.
High efficiency ensures minimum spillage
The parameters that affect the efficiency are, among other things, the scraper to belt contact angle, the contact area and the contact pressure per surface unit. On the ABC scrapers these values are kept as close to the ideal as possible, throughout the wear life of the blades. Because of that, these scrapers show a constant and very high cleaning efficiency from installation and throughout their wear life. To further increase the efficiency of the scraper, the blades are divided into segments, which can move independently of each other. Reduced spillage leads to less wear on the conveyor and its components and great clean-up cost savings.
Long wear life for lowest cost per ton
The life expectancy of a scraper is very much dependent upon its efficiency. The more material that passes between the scraper and the belt, the higher the wear rate becomes. Thanks to the high and constant cleaning efficiency of our scrapers the amount of material still adhering to the belt after the scraper can be reduced to a minimum. Consequently, its wear life is extended and the cost per ton low.
Minimal maintenance needs for trouble free operation
Since the blade to belt contact pressure remains almost constant throughout the entire wear life of the scraper blade, there is no need to re-tension the spring tensioner and the need for maintenance is reduced to an absolute minimum. The belt cleaning system is designed to operate in a dirty and demanding environment, and the blades are shaped in such a way that build-up of material on the blades is prevented.
High reliability during the entire life of the scraper
The ABC scrapers are made of Trellex’s own polyurethane material, which has outstanding wear properties. Using polyurethane means that an aggressive scraping angle can be used without any risk of damaging the belt. The special design of the blades means no reinforcing metal parts are needed.
The base of the blade is securely held in place in a specially designed aluminium cassette.
Choose a Metso Outotec solution
Our conveyor solutions consist of accessories, the belts themselves, and other components.
Metso is a world leader in design and manufacturing in all three categories. We help you get full value from your accessories, belts and components by analysing and eliminating potential failure modes and innovating to extend wear life. When you choose a Metso solution, you’re choosing maximum efficiency and minimum risk – a wise move for any industrial, construction or natural resource company.
About Metso Outotec
Metso Outotec is a frontrunner in sustainable technologies, end-to-end solutions and services for the aggregates, minerals processing and metals refining industries globally. By improving our customers’ energy and water efficiency, increasing their productivity, and reducing environmental risks with their product and process expertise, Metso Outotec is the partner for positive change.
Headquartered in Helsinki, Finland, Metso Outotec employs over 15,000 people in more than 50 countries and its sales for 2020 were about EUR3.9 billion. The company is listed on the Nasdaq Helsinki. Visit: www.mogroup.com
About MIMICO
MIMICO sells, hires, and services heavy machinery for the quarrying, mining, contracting, construction, recycling, and forestry industries.
MIMICO is the New Zealand distributor for Metso:Outotec crushing and screening equipment, Kobelco Hydraulic excavators, Moxy Articulated Dump Trucks, Epiroc rock breakers and demolition equipment, Dynapac construction equipment, Superior conveyors and wash systems, MDS trommels and apron feeders, ZF transmission and drive components for construction equipment, and Cesco concrete mixer bowls, and manufactures Lamella portable waste water treatment plants.
MIMICO’s sales and service operation spans the country, with head office in Matamata, branches located in Auckland, Paraparaumu and Christchurch and a network of service providers as far north as Whangarei and as far south as Invercargill.
For more visit: www.mimico.co.nz