Compact with impact – MSC and the EvoQuip Cobra 290R

Sponsored

Mobile Screening and Crushing NZ (MSC) provides the whole EvoQuip crusher line-up, which includes both the Bison (Jaw) and Cobra (Impactor) range.

Dan Meikle, MSC general manager, comments: “We are proud to be part of the dynamic and growing EvoQuip team, working in partnership with EvoQuip to offer the best solutions for our customers, and to growing the EvoQuip brand in NZ”.

MSC OFFERS A LARGE RANGE OF MOBILE IMPACT CRUSHERS – WITH OUTPUT POTENTIALS UP TO 290 TPH

Cobra 290R impact crusher – product overview

The Cobra 290R is a versatile and easy to use track mounted impact crusher that can operate in the most demanding of applications such as reinforced concrete, recycled asphalt, construction and demolition waste and natural rock. The integrated afterscreen system on the Cobra 290R ensures the required product specification is achieved with oversize material either being recirculated back to the crusher or else stockpiled.

At the heart of the Cobra 290R is the Terex Impact Crusher with a rotor size of 1000mm (40″) x 1034mm (41.5″). This impactor has been developed using components and technology from some of the company’s larger impactors within the Terex range.

Fitted as standard is a hinged inlet lid, which greatly reduces the risk of material bridging at the feed in point. Like the Cobra 230 crusher, the Cobra 290R also has two independent hydraulic controlled aprons, which allow the operator to optimise the material throughput and reduction.

The patented hydraulic overload protection system used not only protects the crusher in the event of an uncrushable piece entering the chamber but it also minimises apron bounce and reduces the amount of oversize material passing.

The tip speed of the rotor can be varied depending on the application and product requirements. Throughout the crushing process, the Cobra 290R constantly monitors the engine load and automatically regulates the feeder speed as required.

The Cobra 290R was designed with the operator in mind in terms of ease of use and serviceability, with ground level access to the engine, hydraulics, service, and refuelling points.

The Cobra 290R is available with the wind sifter as an option, providing the ideal solution to remove contaminants such as plastic and wood from crushed C&D waste based on density and size.

290R benefits:

• The 290R: Diameter Rotor: 40" x 41.5" / 1000mm x 1034mm – The higher the rotor speed the more fines are produced!
• VERSATILE: Versatile in terms of input material and output size. Processes reinforced concrete, construction and demolition waste asphalt, natural rock
• COMPACTION: Material produced is easy to grade and compact making it perfect for base and subbase
• REDUCTION: Ideal for producing a spec’d product without the need of a primary jaw crusher
• Integrated afterscreen system ensures the required product specification is achieved

Key features:

• Perfect solution for on-site recycling in urban areas
• Fuel-efficient and high-performing direct drive system
• Easily transported from job to job
• Ready to crush in minutes as a result of ground level set-up
• Intuitive two-button start-up sequence
• Versatile and easy to use and can operate in the most demanding of applications
• Two independent hydraulic controlled aprons which allow the operator to optimise the material throughput and reduction
• The patented hydraulic overload protection system protects the crusher in the event of an uncrushable piece entering the chamber and minimises apron bounce
• Oversize material either recirculated back to the crusher or stockpiled

Technical Specifications (Cobra 290R)

Hopper
Hopper capacity – 3.3m3

Output
Up to 290 tph

Crusher
Crusher inlet – 1030mm x 790mm
Chamber also features a hinged inlet lid which greatly reduces the risk of material bridging at the feed in point

Pre-screen
2.74m x 1.5m post screen
Integrated pre-screen which can be configured to suit multiple applications

Afterscreen
Aggressive 9’ x 5’ single deck screen

Product conveyor
Conveyor – 1m (W)

Powerunit
315 Hp engine

Contact MSC to discuss how Terex Screens, Crushers & Stacker solutions can benefit your operations.

Although Auckland based, MSC operates NZ-wide in both Sales and Hire.

SALES:
0274 939 098 | andy@mobilescreening.co.nz
0272 255 838 | dan@mobilescreening.co.nz

HIRE:
0272 255 525 | matt@mobilescreening.co.nz
P 0800 MSC LTD