'Productive power' mobile impact crushers

Sponsored

Powerscreen impact crushers are designed to excel as primary impactors, taking large feed material and reducing it down to a sellable product.

Powerscreen's impactor range is ideal for shaping applications including making chips, sand, concrete manufacture, and glass recycling. The range includes both horizontal and vertical impact crushers.

Impactors are often used as a cost-effective alternative to jaw and cone combination plants as they have a good level of reduction and product shaping for many applications.

Product Focus: Trakpactor 290 horizontal impactor

The Powerscreen Trakpactor 290SR impact crusher performs in the most challenging of applications such as construction and demolition, asphalt, concrete, and natural rock. The compact design allows it to operate in small landing spaces and be easily transported from site to site.

Impact crusher ‘Trakpactor 290SR’ being feed by ‘Warrior 600’ scalping screen. Location South Island, New Zealand. Crusher making AP65 / screener scalping fines from feed material

Applications

A versatile and easy to use compact impact crusher that can operate in the most demanding of applications such as recycling, demolition, quarrying and aggregate production.

Recirc intergrated system

The integrated system ensures the required product specification is achieved with oversized material either recirculated back to the crusher or stockpiled.

Portable solution

The machine sets up rapidly and is simple to operate. The compact size also provides extreme ease of transportation, making this portable crusher an ideal solution for remote job sites.

Enclosed hopper

Material is fed into a fully enclosed hopper, which eliminates any potential for material spillage down into the engine bay beneath.

Rapid setup

It is the perfect solution for onsite recycling in urban areas and is easy to transport from site to site where it can be rapidly set up from ground level. This along with the intuitive two-button start up sequence ensures the customer can be crushing in minutes.

Easy operator maintenance & serviceability

With ground level access to the engine, hydraulics, service, and refuelling points, it ensures maintenance is easy for the operator.

• Configuring the machine to suit differing applications is straightforward
• Designed with the operator in mind in terms of ease of use and serviceability
• Easy engine service access with ‘walk in’ ability at rear to access engine dipstick/filters
• Hydraulic components grouped together, and electrical components grouped together for easy troubleshooting
• Post-Screen can be lowered to horizontal to ease mesh change and maintenance
• Ability to quickly detach the complete afterscreen system to convert machine to a straight through model or be able transport it separately

Trakpactor 290SR in operation – South Island, New Zealand. Application: producing 40mm production from alluvial

Trakpactor 290SR – Features

• Fully enclosed hopper to eliminate spillage
• Crusher with hydraulic overload protection
• Modular conveyor with raise/lower facility to aid clearance of rebar
• Product conveyor can be removed as a unit if required
• Proven Terex impact crusher with hydraulic overload protection, 4 bar rotor & twin aprons
• Feeder speed automatically regulates depending on engine load
• Integrated pre-screen for fines removal (punch plate, grizzly bars & blanking plate are all interchangeable)
• HPTO clutch & highly fuel-efficient direct drive system
• Wear-resistant feed hopper
• Simple intuitive push button operation
• Dust suppression system with atomiser nozzles mounted over the product conveyor
• All Powerscreen crushers are fitted as standard with the Pulse Telematics system

Trakpactor 290SR – Tech specification:

Output: Up to 290 tph
Hopper capacity: 3.3m3
Crusher: Twin apron 4 bar impact crusher
Crusher feed opening: 1030mm x 790mm
Rotor speeds: 630-800rpm (34-43 m/s)
Product conveyor: Width 1000mm
Post-Screen: Top deck size: 2.74m x 1.5m

Trakpactor 290SR – Options

• Overband magnet
• Optional bolt on hopper extensions (must be removed for transport)

Trakpactor 290SR – Applications

• Blasted rock
• River rock
• C & D waste
• Foundry waste
• Processed ores
• Processed minerals

Stevens Group

Stevens Group has more than 50 years' accredited experience in importing, distributing, and manufacturing world-class machinery throughout New Zealand.

Stevens Group are proud distributors of Powerscreen throughout New Zealand.

Powerscreen is the world's leading manufacturer of crushers, screeners, and conveyors for the aggregates, recycling, and mining industries.

Stevens Group’s material handling range of equipment offers a wide range of tracked stackers and feeder conveyors to suit your specific material handling requirements.

Stevens Group is very proud to be associated with such a progressive and leading brand as Powerscreen.

Safety and customer experience

• Stevens Group excels in looking after customers and building relationships by offering operator training, machine demonstrations and a highly supportive handover process
• Stevens Group has developed a highly successful sales team which is supported by a strong emphasis on product training

NZ-wide aftermarket service

• Stevens Group is committed to providing clients with global standard equipment and comprehensive aftermarket service and has a large fleet of field service vehicles to ensure its equipment performs at optimal levels with maximum availability

Parts and backup

• Stevens Group's parts facility is worldclass and has 20,000+ different line items.
• Excellent in-house workshop facilities and manufacturing capability aid the ability to act quickly and help the customer.

See Powerscreen equipment at work:

TRY BEFORE YOU BUY – Demos welcomed NZ-wide!

Get in touch: For more information on sales, parts, service, and hire: call 0508 STEVENS or email: sales@stevensgroup.co.nz.

Visit to find out more: stevensgroup.co.nz.